Home and Style

Acrylic plaster: affordable beauty and strength (20 photos)

Pin
Send
Share
Send
Send


Acrylic decorative plaster is the material for the final surface finish. It has properties that allow it to be used for exterior or interior work. It consists of four components:

  • The foundation. As the name implies, it is acrylic. The main binder - polymer acrylic resin - makes the surface elastic and attractive.
  • Modifiers Materials that improve the quality of the composition, giving the desired properties and characteristics.
  • Dyes. Pigments that give resistant bright colors. Are introduced into the composition in the production of accurate dosage, which guarantees the necessary aesthetic and technical qualities of the material.
  • Filler. Defines the surface structure. Usually it is quartz sand or a crumb of natural multi-colored stones. At different sizes of fractions, the mixture consumption per unit area is also unequal.

The composition can be added biocidal impurities. This means that the fungus, mold, and other microorganisms are not afraid of coating. In addition, acrylic plaster is considered an environmentally friendly finishing material.


akrilovaya-shtukaturka-dostupnaya-krasota-i-prochnost-20-foto


akrilovaya-shtukaturka-dostupnaya-krasota-i-prochnost-20-foto-2

Advantages and disadvantages

This material, like any other construction, has positive and negative properties. Processing walls, you need to take into account the shortcomings of acrylic plaster.

The film hardened on the surface hardly lets through wet evaporations: the walls are blocked. Therefore, it is better not to use it, decorating the facade, insulated from the outside with dense mineral wool. Under the direct rays of the sun fades and fades. Therefore, the paint for the facade you need to choose rich, bright.


akrilovaya-shtukaturka-dostupnaya-krasota-i-prochnost-20-foto-5


akrilovaya-shtukaturka-dostupnaya-krasota-i-prochnost-20-foto-6

Types, purpose and features

The name "acrylic plaster" means a significant segment of materials. They are used for finishing the interior and for the facade on the plaster, applied as a basis. They have different purposes and properties that must be considered when choosing. By type of surface distinguish textured, structural, mosaic and Venetian plaster.

The classification of acrylic plaster for exterior work or interior is conditional, since all types, with the exception of Venetian, are suitable for both types of work.


akrilovaya-shtukaturka-dostupnaya-krasota-i-prochnost-20-foto-9


akrilovaya-shtukaturka-dostupnaya-krasota-i-prochnost-20-foto-10

Acrylic textured plaster is of the following types:

  • "Bark beetle" - a combined composition with a stone filler of small fractions. The plaster "bark beetle" is a decorative cavern, similar to the natural, made by the beetle. It looks interesting, but in combination with zero antistatic acrylic leads to increased contamination of the surface. From the street it is well washed with a hose, and indoors it is treated with a vacuum cleaner. Silicone plaster has the same variety.
  • "Fur" (popular name, also known as acrylic pebble plaster). The structure resembles a low nap. The coat plaster is contaminated less because it uses a larger filler and the grooves are small.
  • "Lamb" - imitation of sheep fleece. Added to the composition of the stones create a surface with a uniform grain and roughness.

Textured - the best acrylic plaster for the facade. And low cost makes it the most popular among other decorative.

Structural

The future surface relief is due to the composition of the filler. The mineral base consists of fine quartz or marble chips, creating a beautiful heterogeneity and grain. If they are quite small, then the wall will be almost flat, the middle fractions will give the finished surface a more significant relief.

It adheres well to chipboard, drywall and other mineral structures.

Putting acrylic plaster of different types has nuances. But there are several general principles for doing work.

  1. Training. Implies alignment of the walls. They should be ideal, since acrylic plasters are applied in thin layers and are able to hide only minor flaws on the surface. A deviation of one to two millimeters across the entire plane is allowed, which the applied relief can visually eliminate.
  2. Primer. Removing dust, strengthening the surface gives it a stable adhesion to the plaster. In addition, closed pores, absorbing moisture from the solution. The mineral base of the plaster determines the type of primer: the usual deep penetrating or reinforced.
  3. Application to the surface. For different compositions has its own technology and tools. In any case, it is necessary to mix the solution well before starting work.
  4. For those who want more. If the result seems imperfect, you can decorate the plastered surface further: apply acrylic paints, coat with wax, and polish. Grout is done in a smooth circular motion. It starts a few hours after application.

The composition must be sufficiently viscous to preserve the desired shape. Therefore, calculate the exact consumption of material.

Buying plaster for the bathroom, note: it must be waterproof. When making the ceiling the least trouble is delivered by the drywall: pre-stripping, leveling, repairing cracks are not required, and the ideal decorative surface properties are guaranteed.

Starting work with plaster for the first time, it is better to practice in its application on a small inconspicuous section of the wall. You need to work quickly, otherwise the mixture will dry out.

Significantly no different, but there are features that it is desirable to take into account.

  • Venetian. Expensive decor. It is recommended to pre-reinforce the surface, then putty and prime. The elastic pallet which is applied several layers is used. If the technology is broken, it may cause intractable cracks. It is better to entrust the work to specialists.
  • Structural. Adding coloring pigments is excluded. The composition is applied with a roller or spatula to the surface treated with deep penetrating primer. In order to obtain waviness, the material of large fractions is applied in circular motions. Per square meter consumption of the finished mixture, on average, almost three kilograms.
  • Textured. The most affordable and popular decorative acrylic plaster. With this material, relief or texture is created independently. Work does not require involvement of professionals or use of special tools, it is enough roller, spatula, stamp.

Special particles in the composition are able to hide noticeable irregularities or defects (a typical example is a bark beetle plaster). Therefore, the composition is applied without sacrificing quality even on an unprepared surface. You can limit cleaning, drying, remove all that exfoliate. Next, apply the adhesive composition or special solution.

Per square meter requires about two kilograms of the finished mixture. The larger the filler, the greater the expense.

Before starting work read the instructions, there may be a lot of useful things and tips. Calculate the exact consumption of the composition.

Begin the process only well-rested and healthy. Work needs to be done completely at once. Otherwise, on different parts of the wall will be slightly different.

Pin
Send
Share
Send
Send